Paper roll end sensor enable. Page 76 The value of m selects the mode as follows: Auto Cutter And Drawer Problem 2. Remove the three screws 4. Check the TR Q3, Q4 2. To print the manual completely, please, download it. Function 0, 48 Turns off underline mode.

Uploader: Dagal
Date Added: 11 March 2011
File Size: 59.92 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 46695
Price: Free* [*Free Regsitration Required]

The printer repeats the operation r times. Check the Solenoid in the Drawer Compulsory Failure? Check the generated Frequency Samsung Electro-Mechanics Remove the Washer bixolon srp-350pg 6.

Bixolon srp-350pg position 0, 48 Not printed. Differential Common Mode Range: Check the Harness 3. Disassembly And Assembly Foot-Rubber 4 from the printer. Do not scratch the Printer Head.

Remove the two screws 1. Don’t show me this message again. Got it, continue to print. Close the auto cutter cover. Separate the Manual-Cutter 5 from bixolon srp-350pg Case-Upper 6.

Page 89 Handshake 1. Paper roll Near-END sensor: Page 67 [Description] Turns underline mode on or off, based on the following values of n: Doing so can damage the thermal element. Paper roll near-end sensor enable. Smps Specifications, Smps Output Connector 3.

Check whether Signal is affected by the Cable Noise Handshake 1. Don’t have an account? Paper roll near-end sensor disable. Pull bixolon srp-350pg the roll paper cover by hand. Check bixolon srp-350pg USB Cable whether it is open or short 5. Bixolon srp-350pg the distance from the beginning of the line to the position at which subsequent characters bixolon srp-350pg to be printed. Check the Host whether it works correctly 4.

Commands Transmits the selected printer status specified by n in real-time, according to the following parameters: Page 66 Set the distance from the beginning of the line to the position at which subsequent characters are to be printed. Foot-Rubber 4 from the printer. Brkt Bixolon srp-350pg PCB 2.

Page 37 3 during pushing the Push-Button 2. Open the auto cutter bixolon srp-350pg with power ON. Check the Control, Status Data Line 3.

Samsung SRP-350PG – SRP 350 B/W Direct Thermal Printer Service Manual

The value of m selects the mode as follows: Page of Go. By pressing ‘print’ bixolon srp-350pg you will print only current page. Check the IC U5 2. Transmits the selected printer status specified by n in real-time, according to the following parameters: Function 0, 48 Turns off underline bixolon srp-350pg.

The host transmits a data to the printer, after confirming this signal. Check bixolon srp-350pg Harness 6. Panel Pba And Sensor Problem bixolon srp-350pg. Push the Heat-Sink Assembly 2 in the direction of an arrow and separate it.

An electrolytic capacitor installed with bixolno wrong polarity might explode. Never touch the thermal element with your hand.

Separate the Cover-Plate 7 from the Cover- Housing 3. Bixolon srp-350pg the TR Q3, Q4 2. The host computer is BUSY. Separate the Cover-Cable 2 from the Case- Lower 1.

SAMSUNG SRPPG – SRP B/W DIRECT THERMAL PRINTER SERVICE MANUAL Pdf Download.

bixolon srp-350pg Remove the screws 1. Dip Switch Circuit R2 checks No. Exploded Views and Parts List. Check the Harness 4.

Page 78 Not used. Connector bixolon srp-350pg 0, 48 Drawer kick-out connector pin 2 1, 49 Drawer kick-out connector pin 5 Samsung Electro-Mechanics To print the manual completely, please, download it.

0.00 avg. rating (0% score) - 0 votes